The Barrett model REC7 GEN II piston operated rifle system is a 6.8 SPC semi-auto rifle with a 16" Cold hammer-forged, chrome-lined barrel, PWS Triad Muzzle Brake and a Geissele SSA Trigger.. Included is two 30-round magazines, soft case, one PWS accessory rail and PRI adjustable flip up sights.
Available Cerakote Finishes:
Flat Dark Earth / Tungsten Grey / OD Green / Black
Compact, accurate and completely trustworthy, the REC7 is designed specifically for situations in which there's no room for error. Styled in the familiar AR configuration, it's a serious rifle you can trust with anything-including your life.
This tough-as-nails rifle was designed specifically to answer the call for a low-maintenance, enhanced reliability carbine.
The REC7 rifle’s dependability stems largely from its innovative operating system. Using a minimum number of parts, the piston system separates heat and powder residue from the bolt carrier and trigger assembly. The rifle runs cool and clean, reducing maintenance requirements and increasing endurance.
The patented chrome-lined fluted gas block prevents excessive carbon buildup from operation under adverse conditions. The one-piece 17-4 stainless piston transfers energy to the anti-tilt bolt carrier. Machined from a monolithic block of 8620 steel, the carrier features an integral piston strike face.
The Barrett Enhanced Bolt is made from high-strength 9310 steel. The bolt is designed specifically for use in the piston operated REC7, not just adapted from a direct gas bolt. The bolt’s gas-ring-free design is easy to clean. Reinforced at critical areas, every bolt is proofed and magnetic-particle inspected to guarantee reliable performance.
At the heart of the operating system is a nitrided, two-position, forward-venting gas plug that retains the piston. The piston can be accessed through the front of the gas block without removing the handguard so optical sights or laser devices do not need to be zeroed after routine maintenance.
The REC7 rifle’s forged 7075 aluminum upper and lower receivers are Type 3 hardcoat anodized. The lower houses an ultra-dependable single-stage trigger. The upper supports a free-floated, hammer-forged, chrome-lined barrel with M4 feed ramps machined into the receiver and the barrel extension. A mil-spec A2 flash hider protects the muzzle.
In 5.56 NATO and 6.8 SPC, the REC7 is everything you’d expect from a Barrett rifle, and then some.
1. One-Piece 17-4 Stainless steel piston is easily accessed without removal of the handguard
2. Forged 7075 upper and lower receivers coated with Type 2, Class 3 hard anodized and Cerakote finished
3. Patented, chrome-lined fluted gas block with
M1913 rail reduces the need for maintenance
4. Two-position nitride-finished gas plug
5. Cold hammer-forged, chrome-lined barrel
available in 9.25” (23.5 cm) and 16” (40.6 cm)
6. Enhanced Barrett bolt incorporates simplified
operation and reinforced durability
7. Nickel Teflon® coated anti-tilt full auto bolt carrier
machined from solid block of 8620 steel with
integrated piston strike face
8. PWS Triad muzzle brake
9. Beveled magazine well
for rapid magazine changes
10. Magpul® trigger guard allows
access to trigger with gloves
11. Equipped with Magpul MOE
buttstock and pistol grip
Please Note: This description may represent a general group of products. Please read the item's title and specifications for more specific information about this particular item.