The POF-USA model P308 and P415 Gen 4 regulated gas piston recon rifles are champered in the .308 Win/7.62 Nato and .223/5.56 Nato calibers with a heavy contour fluted barrel and patented Modular Railed Receiver (M.R.R)
P415- .223/5.56 Nato
P308- .308/7.62 Nato
POF also offers an 11 inch M.R.R. rail on most models and the new 14.5 inch M.R.R. rail on specific models. The P308 has a modular railed receiver, Magpul collapsible stock and a A3 flattop upper receiver. Some models feature fixed stocks.
The New Gen 4 models features ambidextrous controls, the new E2 Extractor and new Bolt Catch inside the trigger guard.
Available Barrel Lengths: 14.5" (pinned), 16.5" and 20".
Available Finishes: Black Anodized, NP3 Coated, Burnt Bronze Cerakote, OD Green Cerakote and Tungsten Grey Cerakote. Some colors are only offered on certain models and barrel lengths.
POF Models: P415, P308, P-14 Puritan, P308 War Hog, P308 Skirmish and P415 Skirmish
POF specializes in the manufacturing of custom gas piston AR's dedicated to the precision, quality and reliability of the weapons they develop.
POF Rifle Key features:
E2 Dual-Extraction Chamber-(New for Gen4 Models)
As it turns out, there are advantages to forcing a square peg into a round hole. POF USA's new Gen-4 rifles introduce E² Extraction Technology, which features four channels along the neck of the chamber. What exactly does this do?
When a round is discharged, the neck of the cartridge case forms to the chamber walls causing it to “stick” in the chamber. This patented feature allows a small amount of gases to travel back along the neck of the cartridge case; breaking it free from the walls. In addition, these gases stop against the shoulder of the cartridge case pushing it away from the chamber walls. This is similar to breaking ice cubes off an ice tray.
This removes a tremendous amount of work that would otherwise be left up to the extractor. The extractor is now pulling on a dislodged cartridge case. Imagine the difference in towing a car in neutral rather than a car in park. With the addition of this feature, your extractor can last up to five times longer than it would in a standard chamber.
Multi-Position Gas System
The POF rifle adjustable gas system consists of three major components: the gas plug, gas piston, and operating rod. Residual gases behind the bullet are routed into the gas block, which drives both the piston and operating rod rearward, in turn, cycling the firearm. Suppressors add back-pressure to a firearms operating system and thus increases bolt speed. This causes premature wear on the firearm and can even result in the bolt catching the discharged casing, also known as “stove piping”. The POF gas system allows the user to restrict, and even shut off, this extra back-pressure by simply rotating the gas plug.
The gas plug’s notched position regulates gas pressure for normal, unsuppressed fire. Rotate the gas plug to the smooth position when using a suppressor. Rotating the gas plug 90* (as shown) blocks the rifle from cycling all together. Your semi-auto is now a bolt-action! No tools required!
Modular Railed Receiver (M.R.R.)
The patented Modular Railed Receiver (M.R.R) is POF’s crown jewel for precision and extreme rigidity. This is a two piece upper assembly with a free-floating monolithic handguard that slides on and interfaces directly to the upper assembly thanks to our upper’s reinforced backbone. This backbone is five-times thicker than standard flattop platforms. The suspended handguard keeps your grip and accessories from weighing on the barrel and with the help of our wedge block, reduces stress and flex in the barrel extension area. This ensures both extreme rigidity and accuracy by directing stress risers toward the upper assembly’s strongest, most reinforced materials.
POF's latest generation of Modular Railed Receivers (M.R.R.) does away with the consequent choice between their previous fully-railed “Tactical” design or the minimal, large-scope-friendly “Hunter/Sniper” model and, instead, introduces interchangeable aluminum Picatinny sections. This allows you to attach all your essential rifle accessories along the top, bottom, and sides with an appropriate rail count while keeping your unused areas smooth and lightweight.
Rail sections can be placed on either the top, left, right, or bottom flat areas of the handguard. For a continuous Picatinny surface, rail sections can be placed together using the appropriate male/female ends. This feature allows our M.R.R. to effectively compliment all styles of rail-estate
Nitride Heat-Treated Fluted Barrel
When it comes to firearms, “reliability” means two things: functionality and accuracy. Proper gas regulation and lubricated mechanics are nothing without the precision and durability of a quality barrel. Our chrome alloy barrels are machined for absolute accuracy. Not only are they fluted for optimum heat dissipation, but our barrels are nitride heat-treated for full corrosion resistance.
Magpul Retractable Buttstock
When it comes to weight, feel, function, and durability, POF spares no expense in providing only the best in AR accessories. Like POF, Magpul is a company of constant innovation of only the finest materials.
Their STR/CTR line of polymer retractable buttstocks are easily adjustable and feature supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability and an ambidextrous QD sling mount that will accept any push-button sling swivel.
P415s (5.56/.223) feature the CTR
P308s (7.62/.308) feature the STR and CTR stocks
Anti-Tilt Buffer Tube
POF's mil-spec aluminum anti-tilt buffer tube features carrier cradle extensions to ensure that the carrier is always supported by the buffer tube, even when the bolt carrier is fully forward. This prevents carrier-tilt and premature wear of the buffer tube. Thusly, the buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. POF’s design also features three drain holes.
NP3 Coated Upper & Lower Receivers
Developed by Robar in Arizona, NP3 is a combination of electro-less nickel alloy plating and Polytetrafluoroethylene (aka Teflon).
The result is a smooth, perfectly even, self-lubricating surface inside and out that prevents friction, wear, and corrosion unlike anything else on the market.
Bolt Carrier Group
POF's patented bolt carrier design is custom manufactured with the mechanical key built in and positioned behind the cam pin. This helps prevent carrier tilt and eliminates the possibility of the key becoming misaligned with the carrier. It features a chrome plated bolt, extractor, and firing pin and is able to run dry with its nickel boron coating.
Roller Cam Pin
POF's patented Roller Cam Pin is just one more examble of how far they will fo to reduce friction and drag. Standard AR cam pins feature a square (steel) head that grinds along inside of the aluminum receivers. POF's roller head actually glides along a channel, enhancing reliability and prolonging the life of the receiver.
Ambidextrous Safety/Selector Switch-(New for Gen 4 models)
Keep your weapon ahead of the moment with a double-sided Safety/Selector Switch. Quickly set your rifle to fire, safety, or even select fire with your trigger hand! Whether it's a fight or a hunt, every second counts. POF makes sure you don't have to miss those precious seconds.
Ambidextrous Bolt Release-(New for Gen4 Models)
Standard rifle platforms have easy and fast operations. But whether your stalking, fighting, or a competition shooter, faster is always better. With the inclusion of the POF-USA patented Ambidextrous Bolt Release, readying your weapon has never been more intuitive. With a simple point of your trigger finger, the weapon is locked, loaded... and you're already back on target.
Ambidextrous Magazine Release-(New for Gen4 Models)
Ambidextrous Bolt Catch-(New for Gen4 Models)
POF's new Bolt Catch is conveniently placed inside the trigger guard housing making it easy to activate when needed.
Oversized Integrated Trigger Guard
The original integrated trigger guard for the AR platform, introduced by POF-USA, is machined and coated with the Lower Receiver. Its oversized shape is wide enough for the thickest arctic gloves without the hassle of an unnecessary piece of plastic dangling from your rifle.
KNS Precision Anti-Walk Pins
Not only are these stainless steel, non-rotating trigger/hammer pins the strongest on the market, but POF's rifles us KNS pins specifically designed for their fully-featured ambidextrous lower receiver.
Drop-In Single-Stage Trigger System
POF's single-stage, non-adjustable, drop-in trigger boasts a crisp 4.5-pound pull weight and is pre-assembled in a red anodized aluminum housing (complete with rubber urethane feet) for immediate competition, hunting, and tactical applications right out of the box. Cut from American A2 steel, the trigger, disconnect, and hammer are all nitride heat-treated for ultimate strength and corrosion resistance. To top it off, all POF triggers come standard with KNS Precision stainless steel, non-rotating anti-walk pins specifically designed for our ambidextrous lower receiver!
Oversized Heat Sink Barrel Nut
The patented POF oversized heat sink barrel nut is one of our most significant innovations. At just under four inches long, it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. To dissipate that heat, it boasts an amazing 51/44 square inches of surface area (P415/P308 respectively) where standard AR barrel nuts only have about 8. Take into account the radiation properties of aluminum compared to the traditional steel and you have 17x more heat dissipation than a standard AR! Our barrel nut’s four-inch length also gives the operating-rod substantial guiding surface, assuring constant positive contact with the bolt carrier. Our enhanced backbone receiver and wedge block (see Barrel & M.R.R.) also moves the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.
Interchangeable Rail Sections
POF's latest generation of handguards does away with the difficult decision between our previous integrated rail models. First was the fully railed tactical design, known as the T-rail. Next was the sleeker hunter/sniper design that allowed better use of larger objective scopes, this was known as the H-rail. Our latest modular handguard, known as the M-rail, allows you to have both! The M-rail comes with three aluminum picatinny rail sections* that can be screwed to the top, bottom, and sides of the handguard. This allows you to keep your handguard slim and light weight or you can customize the sections on your handguard for any additional accessories.
Their new universal "M" Rail can effectively complement all styles of rail-estate. The solution: total and complete customization! POF’s new rifles come standard with one medium-length “12-rail” and two smaller “5-rail” interchangeable sections (referring to the available accessory slots found on each piece). These sections are perfect for essential accessories such as bi-pods, slings, flashlights, forward grips, etc.
Nitride Heat-Treated Gas Block
Single-Piece Gas Block
POF's trademark Gas Block design is the heart of our industry-leading Regulated Gas Piston System. Our latest model is a sleek, solid, single-piece item (with no welding or guidance inserts) and is Nitride heat-treated separately for maximum durability.
Triple-Port Muzzle Brake
Designed in house to precisely compliment the platform, our Nitride Heat Treated Muzzle Brake controls muzzle impulse for ultimate accuracy and an unbelievably soft recoil. Comes complete with a Nitride Heat Treated Collar and five (5) strike prongs.
• 14.5", 16.5", and 20" heavy contour hand-lapped button twisted rifled, fluted to reduce weight and heat.
• 4150 Mil-B-11595 chrome-moly-vanadium alloy (machine gun rated).
• Corrosion resistant nitride heat-treated 1:10.
• POF-USA triple-port muzzle device.
• 7.62x51 mm NATO (.308 Win), 6.5 Creedmoor*, and .243 Winchester* chambers.
Method of Operation
• Semi-auto, Gas Piston operated, rotating bolt (short stroke system).
• 3-position gas system for normal, suppressed, and bolt-action operating modes.
• C.R.O.S. (Corrosion Resistant Operating System) Nitride heat treated barrel, single-piece gas block, Nitride heat-treated gas plug, chromed gas piston, and NP3 coated bolt carrier assembly (one-piece) all billet machined.
Bolt & Carrier
• Nickel plated steel bolt carrier, integral keyed, billet machined, heat treated/plated per MIL-SPEC.
• Roller cam pin with chrome plated stem and NP3 coated roller.
• Chrome plated bolt, heat-treated to MIL-SPEC.
• POF-USA Modular Railed Receiver (M.R.R.), free-floating monolithic top rail system, billet machined 7075-T6 aircraft aluminum alloy.
• 2-piece A3 flattop upper receiver with NP3, Black Anodized, or Olive Drab Cerakote finishes.
• Oversized heat-sink barrel nut.
• Black Anodized charging handle.
• P308, GEN III billet machined 7075-T6 aircraft aluminum alloy with integrated oversized trigger guard.
• Ambidextrous bolt release lever machined into the lower receiver.
• Drop-in, single-stage, 4.5 lb. non-adjustable trigger system.
• Magpul MOE pistol grip.
• KNS Precision anti-walk pins.
• Ambidextrous selector switch.
• Magpul STR 7-position retractable buttstock.
• Anti-tilt buffer tube with four drain holes for marine use.
• Black Anodized, NP3 Coated, or Olive Drab Cerakote finishes.
• POF-USA free-floating Modular Railed Receiver (M.R.R.).
• Interchangeable Picatinny rail sections.
• 20-round Magpul PMAG polymer magazine included.
• 8.5 - 8.9 lbs. (empty)
Black Anodized, NP3, or Olive Drab Cerakote, Burnt Bronze Cerakote, Tungsten Grey Cerakote
• All raw materials, heat-treats, platings/coatings, accessories, and component parts on our weapon systems are made 100% through U.S. owned and operated steel mills and manufacturers.
Please Note: This description may represent a general group of products. Please read the item's title and specifications for more specific information about this particular item.
Restricted Product Information
Guns can only be shipped to a location within the USA that holds an FFL (Federal Firearms License) - this can be your local gun shop, pawn shop, sporting goods store, etc. Your local gun dealer will then handle the transfer of the firearm to you.
Please ensure that you have familiarized yourself with the process before placing a firearm order. Please note that you must confirm your acceptance of all of these policies to place a firearm order:
Write a review & get a $5 coupon
Submitted By: Bryon On 06/25/2015
This is the best AR I have ever owned. Very accurate and so far 100% reliable. It's also loaded with great features and even looks good too.
[5 of 5 Stars]
Submitted By: Bryon On 06/16/2015
This was the first time I ordered a firearm online and Hinterland did a great job of helping me with the process. They answered 2 phone calls and 3 emails from me. Emails were all answered the same day I sent them. As far as the POF P415 - it's flawless. Shoots a group smaller than you would believe so no point in posting it.
[5 of 5 Stars]
Submitted By: Casey J. On 02/07/2015
I've had my rifle nearly a year now and have zero complaints. The muzzle brake makes it a fire spitting dragon though, so I'm not sure how "tactical" it is. Love the NP3 finish and chrome BCG, cleaning is a breeze. Gas piston and rod are the only components that needed a scrub. Highly recommend for someone with two thousand bucks burning a hole in their pocket!
[5 of 5 Stars]
Submitted By: Brock E. On 01/17/2012
Worth the wait, but POF needs to keep up the quality to retain their high demand and following. First and foremost this is an awesome battle rifle.
The operation is extremely smooth and the POF muzzle brake keeps you on target for follow up shots as fast as you can squeeze the trigger. I would have liked for POF to keep the Vltor stock and a Hogue-style/type grip. Going to the Magpul was "beneath" a rifle in this class.
Also the rifle shipped without an ambi-selector. (POF customer service has promised to send me one once they are in stock.) The trigger assy in this rifle is of much higher grade than a standard trigger, however, if you were expecting something like pictured above (blue) that looks more like a Timney drop in trigger that is not what they are currently shipping with (it looks more like a beefed up standard trigger assy). The trigger is very crisp and smooth.
I decided to go with POF over LWRC and others because I think their gas piston system is superior. There are no tiny springs and fewer moving parts--a good thing in my book. The operating system is extremely easy to clean and the coating on the BCG means you just wipe off what dirt makes it into the upper receiver.
I love this rifle. I will buy another one if I decided to buy another piston AR. I do hope that POF keeps up with their quality control, does a better job keeping stocks, grips, and other 'out-of-house' parts on hand, and overall makes sure that the quality that made them famous is not diminished by the volume they are trying to kick out.
My best advice would be to tell you to find one and inspect it before you buy. (Good luck finding one at your local gun show/shop though! Hahahaha.)
[4 of 5 Stars]
Submitted By: William P. On 01/16/2012
Great gun, love the NP3 coating on the internals, and the lower/upper receiver. Great price and great service from Hinterland Outfitters!
[5 of 5 Stars]