The Noveske RifleWorks N4 Afghan rifle system is a semi-auto action rifle with a 14.5" stainless steel barrel. Rifle features the Switchblock system and a free floated Lo-Pro 9.5" handguard with 1913 rails. Rifle also features the MUR forged Vltor upper reciever and a forged Gen II lower. Rifle comes with a flip-up front and rear sights and a adjustable Vltor Imod Carbine stock.
Optional Barrel Fluting and Cerakote finish available. Rifle includes one 30-round magazine.
Noveske Rifleworks LLC is a small business in Grants Pass, Oregon devoted to improving the modern battle rifle. Our focus is to manufacture and provide a combat ready weapon capable of precision accuracy with 100% reliability. It is their honor to provide these tools to our Nation in these historic times. They're proud to offer the finest AR variant to date, the N4. Our quality control procedures, both in manufacture and assembly, insure that you have access to a weapon that offers you a tactical advantage when needed on the streets or on the battlefield. Their rifles are available in several configurations for mission specific requirements.
With the increased and often mandatory use of sound suppressors in today's Military and Law Enforcement, certain issues have arisen which require attention regarding the M16/M4 family of weapons. For over two years we have been working on a simple user friendly solution to mitigate the side effects of sound suppressor use on this weapon platform. The result is the Noveske Switchblock®. It is a light weight, simple and durable gas block designed to regulate the increased flow of gas caused by use of a sound suppressor.
COMMON EFFECTS OF SOUND SUPPRESSOR USE
The installation of a sound suppressor causes a few problems of varying importance on the M16/M4 family of weapons.
--Increased bolt speed/premature bolt unlock
--Increased chamber and receiver area fouling
--Increased cyclic rate on Auto
--Increased wear on weapon components
--Increased recoil due to increased bolt carrier group/buffer impact on the rear of the receiver extension
--Increased propellant gasses directed to to the shooter's face
--Premature weapon failure during suppressed use
Unsuppressed Cycle of Operation:
The expansion of the cartridge case neck against the chamber wall seals the propellant gases from leaking around the case. The propellant gasses expand, forcing the projectile through the bore, past the gas port and out the muzzle. The gasses passing through the barrel's gas port, travel rearward through the gas tube and expand in the bolt carrier group, ultimately resulting in the rearward movement of the carrier and the extraction of the spent cartridge case. During the weapon's cycle of operation in unsuppressed use, the bolt unlocks and extracts the spent cartridge case once the propellant gas pressure has been reduced to a level that allows for minimal carbon fouling on the chamber and receiver walls.
Suppressed Cycle of Operation:
With a sound suppressor in place, once the round exits the muzzle, the sound suppressor begins to collect the propellant gasses. Then the sound suppressor holds and delays the exit of the propellant gasses through the front of the sound suppressor. This action also delays the normal reduction of propellant gas pressures throughout the bore and chamber. Simultaneously, the gasses passing through the barrel's gas port, travel through the gas tube at a higher volume and expand in the bolt carrier group sooner than the weapon is designed to handle. The bolt carrier begins it's rearward movement prematurely which also extracts the spent cartridge case before the propellant gas pressure has been reduced to the safe level. Once the spent cartridge case is pulled out of the neck area of the chamber, the carbon rich high pressure propellant gasses escape to the rear around the case and coat the case and chamber walls with carbon. The carbon continues to move to the rear into the receiver area, continuing to coat the receiver walls, bolt carrier group, and the unfired cartridges loaded in the magazine with carbon. Continued use in this manor results in a layer of carbon that will cause a malfunction of the weapon by means of a stuck cartridge case in the chamber or a failure to feed or eject because of increased friction between the bolt carrier and the receiver walls. Lastly, the shooter experiences a blast of pungent propellant gasses directed at his/her face causing difficulty breathing and seeing. RESULT--Premature weapon failure during suppressed use.
With the use of the Switchblock and a sound suppressor, these problems are all addressed and corrected. The barrels gas port diameter is effectively reduced to a level that restricts the volume and pressure of propellant gasses flowing into the gas tube to a level that allows for the propellant gas pressure in the bore and chamber to be reduced to a safe level prior to spent cartridge case extraction. The spent cartridge casings are visibly cleaner, the bolt carrier and receiver are coated with carbon at a slower rate, (compared round for round with an unregulated suppressed weapon), and the chamber remains cleaner. Unfired cartridges in the magazine remain cleaner prior to their entry into the chamber.
--Normal cyclic rate on Auto
--Faster target acquisition/reacquisition
--Increased round count through the weapon between cleanings
--Increased weapon performance with sound suppressor use
--Reduced wear on weapon components
--Reduced propellant gas exposure to the shooter's face
Noveski Stainless barrels are made to fill a precision role while retaining flawless function. Retaining accuracy and reliability is a complicated balance in that the chamber needs to be slightly modified from the NATO specifications to improve bullet hook-up in the throat, while keeping to functional properties of the NATO body dimensions. The result is in their proprietary Noveske chambering. The steel used is a type of 416r and hardened to about 30 HRC prior to any machining. These barrels are button rifles with there proprietary PT buttons. This rifling profile differs from that in the chrome lined barrel line in that the lands have a slightly more trapezoidal shape. This design and the type of stainless used helps the lead edge of the rifling from eroding as fast as it might with conventional rifling, and the barrels tend to outlast others. For use in any precision application, we recommended the stainless barrel for its edge in accuracy and excellent reliability.
14.5" Afghan 6.8mm SPC Stainless Barrel
--1 in 12" twist polygonal rifling
--6.8mm SPC MOD 1 Chamber (.100 freebore)
--Extended feed ramps
--Beadblasted finish on barrel
--Carbine length gas system
--Switchblock,(US pat #7,856,917), pinned to barrel
--Forged Vltor MUR upper receiver featuring an anti-rotation interface with the handguard
--9.5" free floated handguard w/ 1913 rails
--Shot peened and MP tested bolt
--Auto carrier with properly staked carrier key
--Gun Fighter Charging Handle
--Blackout 51T flash suppressor pinned to 16" OAL
Upper Weight: 4 3/4 lbs
Rifle includes above plus:
--Forged Gen II Lower
--ALG Combat Trigger (ACT)
--Mil-Spec receiver extension
--Noveske QD End Plate, staked
--Vltor iMod Carbine stock
--Flip-up front and rear sights (NOT INCLUDED ON UPPER)
--MOE pistol grip
--One 25 rd mag included
Rifle Weight: 7 lbs