Barrett REC7 GEN II Piston Operated Carbine 14591, 6.8 SPC, 16 in Chrome-Lined BBL, Magpul Adj Stock, Barrett KeyMod Rail, Geissele SSA Trigger, Flip-Up Sights, FDE Cerakote Finish, 30 Rds

The Barrett model REC7 GEN II Carbine piston operated system is a .223 Rem/5.56 NATO or 6.8 SPC semi-auto rifle with a 16" Cold hammer-forged, chrome-lined barrel, Barrett Muzzle Brake and a Geissele SSA Trigger.. Included is one 30-round magazines, Barrett logo soft case, one accessory rail and flip-up iron sights.

Available Cerakote Finishes:

Flat Dark Earth / Tungsten Grey / OD Green / Black

Compact, accurate and completely trustworthy, the REC7 is designed specifically for situations in which there’s no room for error. Styled in the familiar AR configuration, it’s a no-nonsense rifle you can trust with anything—including your life.

This tough-as-nails rifle was designed specifically to answer the call for a low-maintenance, enhanced reliability carbine.

The REC7 rifle’s dependability stems largely from its innovative operating system. Using a minimum number of parts, the piston system separates heat and powder residue from the bolt carrier and trigger assembly. The rifle runs cool and clean, reducing maintenance requirements and increasing endurance.

The patented chrome-lined fluted gas block prevents excessive carbon buildup from operation under adverse conditions. The one-piece 17-4 stainless piston transfers energy to the anti-tilt bolt carrier. Machined from a monolithic block of 8620 steel, the carrier features an integral piston strike face.

The Barrett Enhanced Bolt is made from high-strength 9310 steel. The bolt is designed specifically for use in the piston operated REC7, not just adapted from a direct gas bolt. The bolt’s gas-ring-free design is easy to clean. Reinforced at critical areas, every bolt is proofed and magnetic-particle inspected to guarantee reliable performance.

At the heart of the operating system is a nitrided, two-position, forward-venting gas plug that retains the piston. The piston can be accessed through the front of the gas block without removing the handguard so optical sights or laser devices do not need to be zeroed after routine maintenance.

The REC7 rifle’s forged 7075 aluminum upper and lower receivers are Type 3 Class 2 hardcoat anodized and Cerakote finished. The lower houses an ultra-dependable single-stage trigger. The upper supports a free-floated, hammer-forged, chrome-lined barrel with M4 feed ramps machined into the receiver and the barrel extension. A mil-spec A2 flash hider protects the muzzle.

In 5.56 NATO and 6.8 SPC, the REC7 is everything you’d expect from a Barrett rifle, and then some.

Key Features:

1. One-Piece 17-4 Stainless steel piston is easily accessed without removal of the handguard (Mid-Length System)

2. Forged 7075 upper and lower receivers coated with Type 2, Class 3 hard anodized and Cerakote finished

3. Patented, chrome-lined fluted gas block with M1913 rail reduces the need for maintenance

4. Two-position nitride-finished gas plug

5. 16" Cold hammer-forged, chrome-lined barrel with muzzle brake and standard 5.56 NATO and 6.8SPC chmabers

6. Enhanced Barrett bolt incorporates simplified operation and reinforced durability

7. Nickel Teflon® coated anti-tilt full auto bolt carrier machined from solid block of 8620 steel with integrated piston strike face

8. Barrett Muzzle Brake

9. Beveled magazine well for rapid magazine changes

10. Magpul® trigger guard allows access to trigger with gloves

11. Furniture: Magpul MOE buttstock and pistol grip

12. Barrett enhanced handguard utilizing KeyMod attachments

13. Trigger: Geissele SSA Two-Stage Trigger

14. Mil-Spec diameter receiver extension

15.Bravo Company Gunfighter Charging Handle

Calibers:

5.56 NATO/223 Remington
6.8 SPC

Available Cerakote Colors:

Black, Flat Dark Earth, Tungsten Grey and OD Green

Accessories: 1-30 Round Magazine, 1-KeyMod Attachment, Flip-Up Iron Sights, Owner's Manual and Barrett Branded Soft Case

Check out the entire range of products from Barrett.